NETGEAR ProSafe GSM7228PS Cli Manual page 343

• show port all
• show isdp neighbors
• show logging
• show event log
• show logging buffered
• show trap log
Format
show tech-support
Mode Privileged EXEC
terminal length
Use this command to set the number of lines of output to be displayed on the screen, i.e.
pagination, for the show running-config and show running-config all commands.
The terminal length size is either zero or a number in the range of 5 to 48. After the user-
configured number of lines is displayed in one page, the system prompts the user "--More-- or
(q)uit." Press q or Q to quit, or press any key to display the next set of <5-48> lines. The
command terminal length 0 disables pagination and, as a result, the output of the show
running-config command is displayed immediately.
Default 24 lines per page
Format
terminal length <0|5-48>
Mode Privileged EXEC
no terminal length
Use this command to set the terminal length to the default value.
Format
no terminal length
Mode Privileged EXEC
Utility Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
7-17