Access Commands; Show Loginsession - NETGEAR ProSafe GSM7228PS Cli Manual

Term
Secure Protocol Level(s)
Maximum Allowable HTTPS
Sessions
HTTPS Session Hard Timeout
HTTPS Session Soft Timeout
Certificate Present
Certificate Generation in
Progress

Access Commands

Use the commands in this section to close remote connections or to view information about
connections to the system.
disconnect
Use the disconnect command to close HTTP, HTTPS, Telnet or SSH sessions. Use all to
close all active sessions, or use <session-id> to specify the session ID to close. To view the
possible values for <session-id>, use the show loginsession command.
Format
disconnect {<session_id> | all}
Mode Privileged EXEC

show loginsession

This command displays current Telnet and serial port connections to the switch.
Format
show loginsession
Mode Privileged EXEC
Term Definition
ID Login Session ID.
Management Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Definition
The protocol level may have the values of SSL3, TSL1, or both SSL3 and
TSL1.
The number of allowable secure http sessions.
The hard timeout for secure http sessions in hours.
The soft timeout for secure http sessions in minutes.
Indicates whether the secure-server certificate files are present on the
device.
Indicates whether certificate generation is currently in progress.
v1.0, May 2010
8-28