Spanning-Tree Bpduflood; Spanning-Tree Bpduguard - NETGEAR ProSafe GSM7228PS Cli Manual

Default enabled
Format
no spanning-tree bpdufilter default
Mode Global Config

spanning-tree bpduflood

Use this command to enable BPDU Flood on the interface.
Default disabled
Format
spanning-tree bpduflood
Mode Interface Config
no spanning-tree bpduflood
Use this command to disable BPDU Flood on the interface.
Format
no spanning-tree bpduflood
Mode Interface Config

spanning-tree bpduguard

Use this command to enable BPDU Guard on the switch.
Default disabled
Format
spanning-tree bpduguard
Mode Global Config
no spanning-tree bpduguard
Use this command to disable BPDU Guard on the switch.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-11