Show Port-Channel - NETGEAR ProSafe GSM7228PS Cli Manual

For each port-channel the following information is displayed:
Term Definition
Logical The unit/slot/port of the logical interface.
Interface
Port-channel The name of port-channel (LAG) interface.
Name
Link-State Shows whether the link is up or down.
Trap Flag Shows whether trap flags are enabled or disabled.
Type Shows whether the port-channel is statically or dynamically maintained.
Mbr Ports The members of this port-channel.
Active Ports The ports that are actively participating in the port-channel.

show port-channel

This command displays the static capability of all port-channels (LAGs) on the device as well as a
summary of individual port-channels.
Format
show port-channel
Mode • Privileged EXEC
• User EXEC
Term Definition
Static This field displays whether or not the device has static capability enabled.
Capability
For each port-channel the following information is displayed:
Term Definition
Name This field displays the name of the port-channel.
Link-State Shows whether the link is up or down.
Mbr Ports This field lists the ports that are members of this port-channel, in <unit/slot/port> notation.
Active Ports The ports that are actively participating in the port-channel.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-110