Utilities - NETGEAR ProSafe GSM7228PS Cli Manual

Utilities

Table 9-4: Trap Mgr Log Message
Component Message
Trap Mgr Link Up/Down: unit/slot/port
Table 9-5: DHCP Filtering Log Messages
Component Message
DHCP Filtering Unable to create r/w lock for DHCP Filtering Unable to create semaphore used for dhcp
DHCP Filtering Failed to register with nv Store.
DHCP Filtering Failed to register with NIM
DHCP Filtering Error on call to sysapiCfgFileWrite file
Table 9-6: NVStore Log Messages
Component Message
NVStore Building defaults for file XXX
NVStore Error on call to osapiFsWrite routine on file
XXX
NVStore File XXX corrupted from file system.
Checksum mismatch.
NVStore Migrating config file XXX from version Y to Z A configuration file version mismatch was
Log Messages
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
Cause
An interface changed link state.
Cause
filtering configuration structure .
Unable to register save and restore
functions for configuration save
Unable to register with NIM for interface
callback functions
Error on trying to save configuration .
Cause
A component's configuration file does not
exist or the file's checksum is incorrect so
the component's default configuration file is
built.
Either the file cannot be opened or the OS's
file I/O returned an error trying to write to the
file.
The calculated checksum of a component's
configuration file in the file system did not
match the checksum of the file in memory.
detected so a configuration file migration
has started.
9-4