NETGEAR ProSafe GSM7228PS Cli Manual page 533

Term Definition
CP ID The captive portal ID.
CP Name The captive portal name.
Interface The interface associated with the CP ID
Interface The interface description
Description
Operational Status The operational status is enabled or disabled.
Disable Reason The reason if the operational status is disabled.
Block Status It shows this captive portal instance block all traffic or not.
If the interface is specified. The following term will be displayed.
Term Definition
Authenticated The number of authenticated users associated with the CP ID.
users
Example
(Switch)#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Interface Interface Description
--------- ---------------------
Unit:1Slot:0Port:1
(Switch)#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
Interface Description..................... Unit: 1 Slot: 0 Port: 1 Gigab
Operational Status........................ Disabled
Disable Reason............................ Interface Not Attached
Block Status.............................. Not Blocked
Authenticated Users....................... 0
Captive Portal Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
----------------
Disabled
v1.0, May 2010
Operational
Status
----------1/0/1
Blocked
Block
Status
10-16