Lacp Admin Key; Lacp Collector Max-Delay - NETGEAR ProSafe GSM7228PS Cli Manual

lacp admin key

Use this command to configure the administrative value of the key for the port-channel. The value
range of <key> is 0 to 65535.
Default 0x8000
Format
lacp admin key <key>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
no lacp admin key
Use this command to configure the default administrative value of the key for the port-channel.
Format
no lacp admin key
Mode Interface Config

lacp collector max-delay

Use this command to configure the port-channel collector max delay. The valid range of <delay>
is 0-65535.
Default 0x8000
Format
lacp collector max-delay <delay>
Mode Interface Config
Note: This command is only applicable to port-channel interfaces.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-92