Stacking Commands; Dedicated Port Stacking - NETGEAR GSM7224v2 - Layer 2 Managed Gigabit Switch Cli Manual

The Stacking Commands chapter includes the following sections:
• "Dedicated Port Stacking" on page 2-1
• "Front Panel Stacking Commands" on page 2-10
Note: The commands in this chapter are in one of two functional groups:
Note: Show commands display switch settings, statistics, and other information.
Note: Configuration commands configure features and options of the switch. For
every configuration command, there is a show command that displays the
configuration setting.
The Primary Management Unit is the unit that controls the stack.

Dedicated Port Stacking

This section describes the commands you use to configure dedicated port stacking.
stack
This command sets the mode to Stack Global Config.
Format
stack
Mode Global Config

Stacking Commands

v1.0, July 2009
Chapter 2
2-1