NETGEAR ProSafe GSM7228PS Cli Manual page 300

For set-cos-transmit an 802.1p priority value is required and is specified as an integer from 0-7.
Format
police-simple {<1-4294967295> <1-128> conform-action {drop | set-
prec-transmit <0-7> | set-dscp-transmit <0-63> | set-cos-transmit
<0-7> | transmit} [violate-action {drop | set-prec-transmit <0-7>
| set-dscp-transmit <0-63> | set-cos-transmit <0-7> | transmit}]}
Mode Policy-Class-Map Config
Incompatibilities Drop, Mark (all forms)
policy-map
This command establishes a new DiffServ policy. The <policyname> parameter is a case-
sensitive alphanumeric string from 1 to 31 characters uniquely identifying the policy. The type of
policy is specific to the inbound traffic direction as indicated by the in parameter.
Note: The CLI mode is changed to Policy-Map Config when this command is
successfully executed..
Format
policy-map <policyname> in
Mode Global Config
no policy-map
This command eliminates an existing DiffServ policy. The <policyname> parameter is the
name of an existing DiffServ policy. This command may be issued at any time. If the policy is
currently referenced by one or more interface service attachments, this delete attempt fails.
Format
no policy-map <policyname>
Mode Global Config
Quality of Service (QoS) Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
6-24