port-channel name
This command defines a name for the port-channel (LAG). The interface is a logical unit/slot/port
for a configured port-channel, and <name> is an alphanumeric string up to 15 characters.
Format
port-channel name {<logical unit/slot/port> | all | <name>}
Mode
Global Config
port-channel system priority
Use this command to configure port-channel system priority. The valid range of <priority> is 0-
65535.
Default
0x8000
Format
port-channel system priority <priority>
Mode
Global Config
no port-channel system priority
Use this command to configure the default port-channel system priority value.
Format
no port-channel system priority
Mode
Global Config
show lacp actor
Use this command to display LACP actor attributes.
Format
show lacp actor {<unit/slot/port>|all}
Mode
Global Config
The following output parameters are displayed.
Parameter
Description
System Priority The system priority assigned to the Aggregation Port.
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-108