Username Nopassword; Username <Username> Unlock; Username Snmpv3 Accessmode - NETGEAR ProSafe GSM7228PS Cli Manual

no usermane
This command removes a user account.
Format
no username <username>
Mode Global Config
Note: You cannot delete the "admin" user account.

username nopassword

This command removes the password from a user.
Format
username <name> nopassword [level level]
Mode Global Config
username <username> unlock
Use this command to unlock a locked user account. Only a user with read/write access can re-
activate a locked user account.
Format
username <username> unlock
Mode Global Config

username snmpv3 accessmode

This command specifies the snmpv3 access privileges for the specified login user. The valid
accessmode values are readonly or readwrite. The <username> is the login user name
for which the specified access mode applies. The default is readwrite for the "admin" user and
readonly for all other users. You must enter the <username> in the same case you used when
you added the user. To see the case of the <username>, enter the show users command.
Defaults • admin - readwrite
• other - readonly
Management Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
8-30