User Session-Timeout; User Idle-Timeout - NETGEAR ProSafe GSM7228PS Cli Manual

no user group
Use this command to dis-associate a group and user.
Format
no user
Mode Captive Portal Configuration mode

user session-timeout

Use this command to set the session timeout value for a captive portal user. Use the "no" form of
this command to reset the session timeout to the default. The range of session timeout is 0-86400.
0 indicates use global configuration.
t
Defaul 0
Format
user <1-128> session-timeout timeout
Mode Captive Portal Configuration mode
no user session-timeout
Use this command to reset the session timeout to the default.
Format
no user <1-128> session-timeout
Mode Captive Portal Configuration mode

user idle-timeout

Use this command to set the session idle timeout value for a captive portal user.
the user ID. The range of idle timeout is 0-900 seconds. 0 indicates use global configuration.
Default 0
Format
user <1-128> idle-timeout timeout
Mode Captive Portal Configuration mode
Captive Portal Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
<1-128> group <1-10>
v1.0, May 2010
<1-128> is
10-26