Lacp Actor Admin State Passive - NETGEAR ProSafe GSM7228PS Cli Manual

no lacp actor admin state longtimeout
Use this command to set the LACP actor admin state to short timeout.
Format
no lacp actor admin state longtimeout
Mode Interface Config
Note: This command is only applicable to physical interfaces.

lacp actor admin state passive

Use this command to set the LACP actor admin state to passive.
Format
lacp actor admin state passive
Mode Interface Config
Note: This command is only applicable to physical interfaces.
no lacp actor admin state passive
Use this command to set the LACP actor admin state to active.
Format
no lacp actor admin state passive
Mode Interface Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-95