NETGEAR ProSafe GSM7228PS Cli Manual page 453

aaa authentication login
This command is used to set authentication at login. The default and optional list names
that you create with the
command. Create a list by entering the
authentication
list-name method
string used to name this list. The
authentication algorithm tries, in the given sequence. The additional methods of
authentication are used only if the previous method returns an error, not if it fails. To
ensure that the authentication succeeds even if all methods return an error, specify
the final method in the command line. For example if
authentication method after
where:
Format
aaa authentication login {default | list-name} method1 [method2...]
Mode Global Config
Default Uses the listed authentication methods that follow this argument as the default
list of methods when a user logs in.
list-name Character string used to name the list of authentication methods activated when
a user logs in. Up to 12 characters.
method1 [method2...] At least one from the following table:
Keyword
enable
line
local
none
radius
tacacs
The local user database is checked. This has the same effect as the following
Note:
command:
Management Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
aaa authentication login
command for a particular protocol, where
method
, no authentication is used if the radius server is down.
radius
Description
Uses the enable password for authentication.
Uses the line password for authentication.
Uses the local username database for authentication.
Uses no authentication.
Uses the list of all RADIUS servers for authentication.
Uses the list of all TACACS servers for authentication.
aaa authentication login local
v1.0, May 2010
command are used with the
aaa authentication login
argument identifies the list of methods that the
is specified as an
none
is any character
list-name
none
login
as
8-37