Auto-Negotiate All - NETGEAR ProSafe GSM7228PS Cli Manual

no auto-negotiate
This command disables automatic negotiation on a port.
Note: Automatic sensing is disabled when automatic negotiation is disabled.

auto-negotiate all

Format
no auto-negotiate
Mode Interface Config
This command enables automatic negotiation on all ports.
Default enabled
Format
auto-negotiate all
Mode Global Config
no auto-negotiate all
This command disables automatic negotiation on all ports.
Format
no auto-negotiate all
Mode Global Config
description
Use this command to create an alpha-numeric description of the port.
Format
description <description>
Mode Interface Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-4