show stack-port diag
This command shows front panel stacking diagnostics for each port and is only intended for Field
Application Engineers (FAEs) and developers. An FAE will advise on the necessity to run this
command and capture this information.
Format
show stack-port diag
Mode
Privileged EXEC
Term
Unit
Interface
Diagnostic Entry1
Diagnostic Entry2
Diagnostic Entry3
Stacking Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
Definition
The unit number.
The slot and port numbers.
80 character string used for diagnostics.
80 character string used for diagnostics.
80 character string used for diagnostics.
v1.0, May 2010
2-12