Port-Security Max-Dynamic - NETGEAR ProSafe GSM7228PS Cli Manual

port-security
This command enables port locking at the system level (Global Config) or port level (Interface
.
Config)
Default disabled
Format
port-security
Mode • Global Config
• Interface Config
no port-security
This command disables port locking for one (Interface Config) or all (Global Config) ports.
Format
no port-security
Mode • Global Config
• Interface Config

port-security max-dynamic

This command sets the maximum number of dynamically locked MAC addresses allowed on a
specific port.
Default 600
Format
port-security max-dynamic <maxvalue>
Mode Interface Config
no port-security max-dynamic
This command resets the maximum number of dynamically locked MAC addresses allowed on a
specific port to its default value.
Format
no port-security max-dynamic
Mode Interface Config
Switching Commands
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
3-154