Stacking Commands; Dedicated Port Stacking; Stack - NETGEAR GSM7328Sv1 - ProSafe 24+4 Gigabit Ethernet L3 Managed Stackable Switch Cli Reference Manual

This section describes the stacking commands available in the 7300S Series Stackable
Switch CLI.
The Stacking Commands section includes the following topics:
• Section 17.1 "Dedicated Port Stacking" on page 1
• Section 17.2 "Front Panel Stacking Commands" on page 10
The commands in this section are in one of two functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
Note: The Primary Management Unit is the unit that controls the stack.

17.1 Dedicated Port Stacking

This section describes the commands you use to configure stacking.

17.1.1 stack

This command sets the mode to Stack Global Config.
Format
Mode

Stacking Commands

Stacking Commands
stack
Global Config
v4.1, October 2008
Chapter 17
17-1