NETGEAR ProSafe GSM7228PS Cli Manual page 504

Table 9-25: 802.3ad Log Messages
Component Message
802.3ad dot3adNimEventCompletionCallback,
dot3adNimEventCreateCompletionCallback:
DOT3AD: notification failed for event(%d),
intf(%d), reason(%d)
Table 9-26: FDB Log Message
Component Message
FDB fdbSetAddressAgingTimeOut: Failure
setting fid %d address aging timeout to %d
Table 9-27: Double VLAN Tag Log Message
Component Message
Double Vlan Tag dvlantagIntfIsConfigurable: Error accessing
dvlantag config data for interface %d
Table 9-28: IPv6 Provisioning Log Message
Component Message
IPV6 ipv6ProvIntfIsConfigurable: Error accessing
Provisioning
IPv6 Provisioning config data for interface
%d
Table 9-29: MFDB Log Message
Component Message
MFDB mfdbTreeEntryUpdate: entry does not exist Trying to update a non existing entry
Log Messages
ProSafe 7200 Managed Switches CLI Manual, Software Version 8.0.3
v1.0, May 2010
Cause
The event sent to NIM was not completed
successfully
Cause
Unable to set the age time in the hardware
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no pre-
configuration.
Cause
A default configuration does not exist for this
interface. Typically a case when a new
interface is created and has no pre-
configuration.
Cause
9-14