Management Commands - NETGEAR ProSafe GSM7228PS Cli Manual

This chapter describes the management commands available in the managed switch CLI.
The Management Commands chapter contains the following sections:
• "Configuring the Switch Management CPU" on page
• "Console Port Access Commands" on page
• "Telnet Commands" on page
• "Secure Shell (SSH) Commands" on page
• "Management Security Commands" on page
• "Hypertext Transfer Protocol (HTTP) Commands" on page
• "Access Commands" on page
• "User Account Commands" on page
• "SNMP Commands" on page
• "RADIUS Commands" on page
• "TACACS+ Commands" on page
• "Configuration Scripting Commands" on page
• "Pre-login Banner and System Prompt Commands" on page
Warning: The commands in this chapter are in one of three functional groups:
• Show commands display switch settings, statistics, and other information.
• Configuration commands configure features and options of the switch. For every
configuration command, there is a show command that displays the configuration
setting.
• Clear commands clear some or all of the settings to factory defaults.

Management Commands

8-8.
8-11.
8-16.
8-19.
8-28.
8-29.
8-40.
8-52.
8-67.
8-71.
v1.0, May 2010
8-2.
8-20.
8-73.
Chapter 8
8-1