Error Messages - Yamaha A5000 Service Manual

ERROR MESSAGES

Here is a list of the error messages that will appear when an incorrect operation is performed or when a setting is incorrect.
Audio CD is required. ....................................... An audio CD is not loaded into the external CD-ROM drive.
Audition requires more memory. ................... There is not enough wave memory available to use the AUDITION function.Direct playback
Bulk data error. ................................................. Processing of a bulk dump failed.
Bulk protect switch is ON. .............................. Bulk data or a SCSI message was received when the bulk protect switch was "on."
Cannot copy Volume to FD. ........................... Cannot copy a volume unit to a floppy disk.
Cannot create sample (>16MW). .................. An attempt was made to cteate a sample larger than 16 Mwords (32 megabytes).
Cannot find associated file. ............................ The voice file associated with the voice data could not be located.
Cannot find disk. .............................................. Not ready for disk operation.
Cannot find CD-R. ........................................... Cannot prepare the CD-ROM drive for operation.
Cannot find file. ............................................... The specified file does not exist.
Cannot find SCSI or IDE disk. ........................ SCSI or IDE disk could not be found.
Cannot revert this sample. ............................. The revert function cannot be used with newly created samples which have no been saved or
Cannot write to this disk. ............................... An attempt has been made to write to an unwriteable CD-ROM or other disk.
CD-R size overflow. ......................................... The data to be written exceeds the capaity of the CD-R disk.
DIG or OPT signal input is required. ............. No digital signal is present at the DIGTAL IN or OPTICAL IN terminal.
Disk drive is not ready. .................................... The disk is not ready for saving or loading.
Disk is duplicated in list. ................................. Duplicate backup source disks have been specified.
Disk is not formatted. ..................................... The disk is not formatted for the A5000/A4000.
Disk is write protected. ................................... The disk is write protected, and writing could not be performed.
Disk read/write error. ....................................... An error occurred while reading or writing to/from disk.
File is being accessed. ....................................... You attempted to access a file which was undergoing some type of processing.
MIDI buffer is full. ........................................... The A5000/A4000's processing was not able to keep up with MIDI input.
MIDI is busy. .................................................... You attempted to execute a bulk dump from the front panel while a bulk dump or parameter
MIDI receive error. .......................................... A MIDI receive error occurred.
Name already exists. ........................................ A file on disk or in memory with the specified name already exists.
Non-existent track or index. .......................... The audio CD loaded into the external CD-ROM drive does not have the specified track number
Not enough disk area or too many items. .... There is not enough disk space to complete the operation, or the total number of samples/sample
Param memory full or too many samples. ... The operation cannot be completed because not enough parameter memory is available, or the
Please set device number. ................................ Transmission or reception of bulk data was attempted with the device number turned off.
Sample Bank is selected in list. ...................... Sample banks cannot be written to an audio CD.
Sample processing failed. ................................ When executing a waveform processing command, the specified command could not be executed
SIMM configuration error. .............................. The A5000/A4000 was not able to start up, due to the fact that expansion SIMM's are not
SCSI terminator or device error. .................... A SCSI error has occurred. Check terminators and connections and try again.
Some samples are copy protected. ................ You have attempted to export or write copy-protected samples to an audio CD.
Too many samples. .......................................... The operation cannot be completed because the number of target samples is too great. Up to 128
Too many takes. .............................................. The sample could not be created, either because the maximum number of 64 was exceeded when
Try physical format. ....................................... Logical formatting failed. Try physical formatting.
Unknown disk or file format. ......................... Either the contents of the file have been damaged, or it is the wrong format.
Unsupported file format. ................................ The file is corrupted, or has an unsupported format.
Unsupported file name. ................................... The file name could not be detected by the A5000/A4000.
Unsupported sampling frequency. .................. Sample that do not have a 44.1 kHz sampling rate cannot be written to an audio CD.
Verification error. ............................................. A verification error occurred while writing to disk.
Wave memory error. ....................................... An error occurred in wave memory.
Wave memory full. .......................................... The specified command could not be executed due to insufficient free space in wave memory.
from the disk is not possible.
imported samples.
change etc. was being processed.
or index number.
banks which can be saved to disk has been exeeded.
number of samples, sample banks, etc., which can be retained in memory has been exceeded.
due to insufficient free space in the work area of wave memory, or for some other reason.
installed in pairs, or because the usage order of the expansion slots is incorrect etc.
samples can be arranged at one time, and maximum number of samples that can be contained in a
sample bank is 127.
consecutively recording with New+, or because an identically-named sample already exists.
A5000/A4000
31