Error Message - Yamaha RS7000 Service Manual

RS7000

ERROR MESSAGE

Operational Errors
No Data
Illegal Input
Illegal Track Number
Illegal Phrase Number
Illegal Measure
Illegal Check Box
Meter Mismatch
No F7 (End Of Exc.)
Preset Phrase
Pattern Length Mismatch
Phrase Length Mismatch
Phrase Number Overflow
Too Long Sample
Too Short Sample
Too Low Freq
Digital In Unlocked
System Errors
Backup Battery Low
Sequence Memory Full
Sample Number Overflow
Too Many Local Voices
Too Many Common Voices
Too Many Sample Voices
Wave Memory Full
Factory Set
66
When a job is executed, the selected track or range contains no data. Select an
appropriate track or range.
An unacceptable input or value has been specified. Check the input method or
value.
An unacceptable track number has been specified. Select the track again.
An unacceptable phrase number has been specified. Select the phrase again.
An unacceptable measure number has been specified. Select the measure
again.
No check boxes have been checked in a track job which requires a check box
selection. Check the appropriate check box.
The meter values of the original and edited data are different.
Exclusive data has been entered or changed without the necessary "End Of
Exclusive" byte (F7). Make sure F7 is included.
You have attempted to edit or record a preset phrase. Preset phrases must be
copied to a user phrase before they can be edited.
A job will result in the length of a phrase being greater than 256 measures.
An edit operation will result in a phrase which is longer than 256 measures.
The maximum number of phrases (256) has been exceeded when recording,
executing a job, or editing.
A sample time stretch or other job has resulted in a sample being too long.
The sample length is too short and the Frequency Convert job cannot be exe-
cuted.
The sampling frequency is too low and the Frequency Convert job cannot be
executed.
The DIGITAL/OPTICAL input is unlocked. Check the connections and the out-
put from the source device.
The internal backup battery is running low.
The internal memory is full and recording, editing, job execution, MIDI recep-
tion/transmission, or loading from card or disk cannot continue. Try again after
erasing unwanted song, pattern, or user phrase data.
A sampling operation, job, or load operation has exceeded the maximum
allowable number of samples. Try again after erasing unnecessary samples.
The maximum number of samples allowable for a pattern or song (128) has
been exceeded.
The maximum allowable number of common sample voices (128) has been
exceeded.
The maximum overall number of sample voices (256) has been exceeded.
The wave memory is full and further sampling operations, jobs, or load opera-
tions cannot be executed. In some cases, the amount of remaining memory will
be increased when you execute the Wave Memory Optimize operation.
This message appears when the RS7000 is restored to the initial factory set-
tings. The data in internal memory can be corrupted when the backup battery
voltage runs too low, for example, and all data will automatically be restored
to the factory settings, causing this message to appear.