Customize Screen Layout (Add Functions) - Kyocera KM-C2630D Operation Manual

Section 7 COPIER MANAGEMENT

Customize screen layout (Add functions)

Perform the following procedure to add often-used functions and/or
modes, or to change the order of their layout, in order to make the
display more appropriate to the way you use the copier.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Customize(Add function)" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Customize(Add function)" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit 999 Set
Modify Copy On / Default Off
Display register key On
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Preset limit 999 Set
Modify Copy On / Default Off
Display"Register"key On
Customize(Main function)
Customize(Add function)
Default setting
7-98
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Setting mode
Up
Down
Change #
Setting mode
Up
Down
Change #
3
If you want to add functions and/or modes to the "User
choice" tab, press the " " or the " " cursor key under the
list on the right to select the item you want to add. Then
press the " " or the " " cursor key under the list on the
left to select in what order you want it to be added in that
tab. Finally, press the " " key to add the selected item to
the "User choice" tab.
Inch specifications
Customize(Add function)
Basic
End
User choice
Default setting - Copy default
Metric specifications
Customize(Add function)
Basic
End
User choice
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
Close
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Back
Register mode Addition mode
7 Margin None
8 Border Erase Select paper
9 Combine Combine
10 None Auto Selection
11 None Batch scanning
12 None Margin
Back
Register mode Addition Mode
7 Margin None
8 Erase Select paper
9 Merge Merge
10 None Auto selection
11 None Batch scanning
12 None Margin
Close
Close