Making Copies When Copy Management Is Turned On - Kyocera KM-C2630D Operation Manual

Making copies when copy management
is turned ON
When copy management is turned ON, copying will only be
possible when a valid department ID-code is entered.
IMPORTANT!
Once you are finished copying, BE SURE to press the
[Management] key so that the "Enter ID-code" screen is
displayed again.
1
Use the numeric keys on the keypad to enter your
department ID-code, and then press the "Enter" key.
The "Basic" screen will be displayed.
Inch specifications
Enter ID-code.
Metric specifications
Enter ID-code.
Each Mgt.
Total
clear
Enter
Each Mgt.
Total
clear
Enter
Section 7 COPIER MANAGEMENT
NOTES
• If you enter the wrong ID-code, press the "clear" key
and reenter the correct ID-code.
• If an invalid (unregistered) department ID-code is
entered, an error alarm will sound. Enter the correct
ID-code.
• If you enter your department ID-code and press the
"Each Mgt. Total" key, you can check the copy counts
for your own department.
Inch specifications
Each Management Total
Number print.
Copy
Black & White: 50
0
Monocolor:
13
Full-color:
63
Total:
Scan.Transm.
Scanner
Scan # pages: 100
Default setting - Management
Metric specifications
Each Management Total
Number print.
Copy
Black & White: 50
Monocolour: 0
13
Full-colour:
63
Total:
Scan.Transm.
Scanner
Scan # pages: 100
Default setting - Management
2
Perform the desired copy operation as usual.
3
Once you are finished copying, press the [Management]
key.
Close
Printer Total
Number in( )
30 80
is limit value
- - - - - - - 0
5 18 (1,000)
35 98 (5,000)
Fax transm.
FAX
Trsm. # pages: 100
Commun.Time:
1Hrs 10Min
01 1st Sales Dept.
Close
Printer Total
Number in( )
30 80
is limit value.
- - - - - - - 0
5 18 (1,000)
35 98 (5,000)
Fax transm.
FAX
Trsm. # pages: 100
Commun.Time:
1Hrs 10Min
01 1st Sales Dept.
7-41