Kyocera KM-C2630D Operation Manual page 119

2
Press the "1 sided/2 sided" ["1-sided/2-sided"] key.
The "1 sided/2 sided copy" ["1-sided/2-sided copy"] screen
will be displayed.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Job Build - Step 1
1 sided
11x8 /
1
2
Select Original
paper type
Offset AMS
Reduce
Finished
/Enlarge
Basic Quality
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Job Build - Step 1
1-sided
Select Original
paper type
Group AMS
Reduce/
Finished
Enlarge
Basic Quality
3
Press the "2 sided copy" ["2-sided Copy"] key and then press
the "Open from left" ["Left binding"] key.
Finally, press the "Close" key. The touch panel will return
to the screen in step 2.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
1 sided/2 sided copy
Finished
1 sided Open from
copy left
2 sided Open from
copy right
Open from
top
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
1-sided/2-sided Copy
Finished
1-sided Left
Copy binding
2-sided Right
Copy binding
Top
binding
1 sided copy Insert
page
1 sided/
2 sided
1 sided copy-Left
Back Edge
Finished page #: 0
Orig. set
direction
Edit
1-sided Copy Insert
blank page
1-sided/
2-sided
1-sided Copy-Left
Back Edge
Finished page #: 0
Orig. set
direction
Edit
r
Back
Check direction
Check direction of
original top side.
Left top
Rear
corner
r
Back
Check direction
Check direction of
original.
Left top
Back Edge
corner
Section 6 OTHER CONVENIENT FUNCTIONS
4
Press the "Edit" key.
Then, in the resulting screen, press the "Modify Copy" key.
The "Modify Copy" screen will be displayed.
Inch specifications
set
Ready to Job build.(Full-color)
Place originals then press Start key.
End
Job Build - Step 1
Border
Erase
None
Margin/
Centering
Basic
Metric specifications
set
Ready to Job build.(Full Col.)
Set original. Press Start key.
End
Job Build - Step 1
Erase
Mode
None
Margin/
Imag. shift
Basic
5
Press the "On" key.
Press the "Close" key. The touch panel will return to the
screen in step 4.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Set
Modify Copy
Close
Off
On
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Set
Modify copy
Close
Off
On
Off Auto Off
Select Modify
orig. size Copy
2 sided copy-Left
None Top tray
Finished page #: 0
Select of
Page #
Output
Quality Edit
Off Auto Off
Select Modify
size. orig copy
2-sided Copy-Left
None Top tray
Finished page #: 0
Page Select of
numbering Output
Quality Edit
When select [On], data can be saved.
You can recall and re-print at anytime.
Select password to secure a
stored document.
When select [On], job can be saved.
You can recall and re-print at anytime.
You can set a password to secure saved
document.
set
End
Insert
page
Print from
Rear page
set
End
Insert
blank page
Print from
rear page
set
Back Close
set
Back Close
6-69