Kyocera KM-C2630D Operation Manual page 235

Customize screen layout (Main functions)
Perform the following procedure to change the order of the main
functions and modes that are displayed in the "Basic" and the
"User choice" tabs in order to make the display more appropriate to
the way you use the copier.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Customize(Main function)" under the "Default
menu" column on the left side of the touch panel and then
press the "Change #" key.
The "Customize(Main function)" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Preset limit
Modify Copy
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
Register Print User
Adjustment
orig. size report
Setting mode
999 Set
On / Default Off
On
Change #
Setting mode
999 Set
On / Default Off
On
Change #
3
If you want to change the order of the basic functions and
modes, press the " " or the " " cursor key to select the
item you want to move. Then press the "Move Ahead" key
or the "Move Behind" ["Move backward"] key to move that
item and change the order of display. The final display of
the basic functions and modes will be in accordance with
the numbers in the list and those shown in the tabs to the
left of that list.
Inch specifications
Customize(Main function)
Basic
End
User choice
Default setting - Copy default
Metric specifications
Customize(Main function)
Basic
End
User choice
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
Close
The touch panel will return to the "Default setting" screen.
Up
6
Down Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Up
Down
Section 7 COPIER MANAGEMENT
Register mode
1 Exposure mode
2 Reduce/Enlarge
3 Orig. quality
4 Sort/Finished
5 1/2 sided
6 Original size
Register mode
1 Exposure mode
2 Reduce/Enlarge
3 Quality orig.
4 Sort/Finished
5 1/2 sided
6 Original size
Back Close
Move
Ahead
Move
Behind
Back Close
Move
ahead
Move
backward
7-97