Color Copy Settings; Adjusting The Color Balance - Kyocera KM-C2630D Operation Manual

Section 5

Adjusting the color balance

The color balance can be fine-adjusted by increasing or decreasing
the intensity of each of the colors: cyan, magenta, yellow or black.
IMPORTANT!
• These adjustments are only available with full color
and A.C.S. copying.
• These adjustments are NOT available in the auto
exposure mode.
• These adjustments are NOT available in combination
with one-touch image quality adjustment.
• For a sample of copies made with an adjusted color
balance, see "Adjusting the color balance" on
page ii.
1
Press the "Color func." ["Colour func."] tab.
The "Color func." ["Colour func."] tab will be displayed.
2
Press the "Color balance" ["Colour balance"] key.
The "Color balance" ["Colour balance"] screen will be
displayed.
Inch specifications
Ready to copy. (Full-Color)
Color
Adjust Hue
balance
Mono
color
Basic User choice
Metric specifications
Ready to copy. (Full Col.)
Colour
Adjust Hue
balance
Mono
colour
Basic User choice

COLOR COPY SETTINGS

Paper Size
1
11x8 / "
2
One touch Color/B&W
image selection
Function Color func. Program
Paper Size
Quick Colour/B&W
image selection
Function Colour func.
Program
3
Press the "On" key.
Inch specifications
Ready to copy. (Full-Color)
Color balance
Off
On
Metric specifications
Ready to copy.(Full Col.)
Colour balance
Off
On
Set
Paper Size Set
11x8 1 / "
2
Register Back Close
Yellow, Magenta, Cyan, Black
Color Balance Adjustment.
Paper Size Set
Register Back Close
Yellow, Magenta, Cyan, Black
Colour Balance Adjustment.
5-1