Paper Size (Drawer[Cassette] No.1 - No) - Kyocera KM-C2630D Operation Manual

Paper size (drawer[cassette] No.1 - No.4)
Perform the following procedure to set the size of paper that is
loaded in drawer[cassette] No.3 and No.4.
NOTES
• The setting for drawer[cassette] No.1 will not be
available on duplex copiers because the Duplex Unit is
installed in its place.
• The setting for drawer[cassette] No.2 through No.4 will
only be available when the optional Paper Feeder is
installed on your copier.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select one of the "Paper size" settings ("3rd
drawer[cassette]" or "4th drawer[cassette]") under the
"Default menu" column on the left side of the touch panel
and then press the "Change #" key.
The screen to set the paper size for that drawer[cassette]
will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu
Auto drawer switching
Paper size (1st drawer)
Paper size (2nd drawer)
Paper size (3rd drawer)
Paper size (4th drawer)
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu
Auto cassette switching
Paper size (1st cassette)
Paper size (2nd cassette)
Paper size (3rd cassette)
Paper size (4th cassette)
Default setting
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
On / All types of paper
Auto/Inch
Auto/Inch
Auto/Inch
Auto/Inch
Change #
Setting mode
On / All types of paper
Auto/Centimeter
Auto/Centimeter
Auto/Centimeter
Change #
Auto/Centimeter
3
If you selected "Auto Detection", select the measurement
unit. If you selected "Standard sizes", select the paper size.
Inch specifications
Paper size (3rd drawer)
Select paper size.
Auto
Detection
Standard
sizes
Default setting - Machine default
Metric specifications
Paper size (3rd cassette)
Select paper size.
Auto
Detection
Standard
sizes
End
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
End
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Up
Down
Close
Up
Down
Section 7 COPIER MANAGEMENT
A 3 B 4 11x17"
A 4 B 5 8 1 / x14"
2
A 4 B 5 11x8 1
A 5 Folio 8 1 / x11"
2
A 3 B 4 11x17"
A 4 B 5 8 1 / x14"
2
A 4 B 5 11x8 1
Folio 1
A 5 8 / x11"
2
Back Close
5 1 / x8 1 / "
2 2
8 1 / x13"
2
/ "
2
Back Close
5 1 / x8 1 / "
2 2
8 1 / x13"
2
/ "
2
7-47