Kyocera KM-C2630D Operation Manual page 229

Auto Rotation mode ON/OFF
Perform the following procedure to determine whether or not the
Auto Rotation mode will be the default setting in the initial mode.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Auto Rotation" under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
The "Auto Rotation" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left
Default erase width Border
Preset limit 999 Set
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left 6mm 0mm
Default erase width Border 6mm Center 12mm
Preset limit 999 Set
Default setting
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Down
1 / " 0"
4
1 1
/ " Center / "
4 2
Change #
Setting mode
Up
Down
Change #
Section 7 COPIER MANAGEMENT
3
Press the "Rotate" key if you want to make the Auto
Rotation mode the default setting in the initial mode.
Inch specifications
Auto Rotation
Select default mode for Auto Rotation, ON or OFF.
Default setting - Copy default
End
Metric specifications
Auto Rotation
Select default mode of Auto Rotation, ON or OFF.
Default setting - Copy default
End
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
Close
tab.
Close
No Rotate
Rotate
No rotate
Rotate
Back Close
Back Close
7-91