Auto Low Power Time - Kyocera KM-C2630D Operation Manual

3
Press the "+" key or the "-" key to change the displayed time
to the desired setting (between 1 minute and 240 minutes).
Inch specifications
Sleep mode changing time
Possible to set the time for switching to sleep mode
automatically after copy is done or last operation
( 1~240)
60
Default setting - Machine default
Metric specifications
Sleep mode changing time
Possible to set the time for switching to sleep mode
automatically after copy is done or last operation
( 1~240)
60
Default setting - Machine default
NOTES
• It is recommended that you try to set a longer time
interval before auto sleep engages if you use the copier
frequently, and to a shorter time if there are long
intervals between use.
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Back
Minute
Back
Minute
Section 7 COPIER MANAGEMENT

Auto low power time

Perform the following procedure to set the amount of time between
the point that copying ends and the energy-saving Low power mode
engages.
Close
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Close
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Low power mode chng. time" under the "Default
menu" column on the left side of the touch panel and then
press the "Change #" key.
The "Low power mode chng. time" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
Select Copy output mode
Default setting
Metric specifications
Default setting/ Counter
Machine default
Paper type (paper weight)
Select paper type (2sided)
Sleep mode changing time
Low power mode chng. time
Select COPY output mode
Default setting
Language
Bypass
setting
Register
orig. size
Language
Bypass
setting
Register
orig. size
Default menu Setting mode
60 Minute
15 Minute
Top tray
Default menu Setting mode
60 Minute
15 Minute
Top tray
End
Management
Counter
check
User
Print
Adjustment
report
End
Management
Counter
check
User
Print
Adjustment
report
Close
Up
Down
Change #
Close
Up
Down
Change #
7-53