Kyocera KM-C2630D Operation Manual page 161

7
Select "Name to display" under the "Setting item" column
on the left side of the touch panel and then press the
"Change #" key.
The "Name to display" screen will be displayed.
Inch specifications
Department inform. edit
Setting item
ID-code
Name to display
Default setting - Management - Management edit
Metric specifications
Department info. Editing
Setting item
ID-code
Name to display
Default setting - Management - Management edit
8
Press the "AllDel." key to delete the old department name,
then enter the new name.
Inch specifications
Metric specifications
NOTE
For information on how to enter the department name,
refer to "Entering characters" on page 7-119.
Back
Value
01
1st Sales Dept.
Change #
Back
Value
01
1st Sales Dept.
Change #
Section 7 COPIER MANAGEMENT
9
Press the "End" key.
The touch panel will return to the screen in step 7.
10
Press the "Close" key.
The touch panel will return to the screen in step 3.
11
Press the "Close" key.
Close
The touch panel will return to the screen in step 2.
12
Press the "Close" key.
Close
7-23