Kyocera KM-C2630D Operation Manual page 205

Default setting
Manual exposure Adjusts the median exposure value when the text+photo
adjustment mode is selected for the image quality.
(text+photo mode)
Manual exposure Adjusts the median exposure value when the photo mode is
adjustment (photo selected for the image quality.
mode)
Manual exposure Adjusts the median exposure value when the print mode is
adjustment (print selected for the image quality.
mode)
Manual exposure Adjusts the median exposure value when the text mode is
adjustment (text selected for the image quality.
mode)
Manual exposure Adjusts the median exposure value when the map mode is
adjustment (map selected for the image quality.
mode)
Sort mode ON/OFF Determines whether or not the Sort mode will be the default
setting in the initial mode.
Auto Rotation mode Determines whether or not the Auto Rotation mode will be
ON/OFF the default setting in the initial mode. If Auto Rotation is
turned ON, the image will be automatically rotated even if
the orientation of the original is different from that of the
paper loaded in the drawers[cassettes].
Margin width Determines the default value of the location and width of the
margins in the margin mode.
Erased border width Determines the default value for the width of the border to
be erased in the two border erase modes.
Copy limit Sets the limit for the number of copies (or copy sets) that can
be made at a time.
Description
Section 7 COPIER MANAGEMENT
Available Factory
settings setting
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
-3 – +3 Standard setting
(0)
Sort:On / Sort:Off Sort:On
Rotate / No Rotate Rotate
Inch Inch
specifications specifications
Left/right: 0 – 3/4 Left: 1/4 (inches)
(inches) Top: 0 (inches)
Top/bottom: 0 – 3/4
(inches)
Metric Metric
specifications specifications
Left/right: 0 – 18 Left: 6 (mm)
(mm) Top: 0 (mm)
Top/bottom: 0 – 18
(mm)
Inch Inch
specifications specifications
Outside border: Outside border:
0 – 3/4 (inches) 1/4 (inches)
Center area: Center area:
0 – 1
(inches) 1/2 (inches)
1/2
Metric Metric
specifications specifications
Outside border: Outside border:
0 – 18 (mm) 6 (mm)
Center area: Center area:
0 – 36 (mm) 12 (mm)
1 – 999 999
Reference
page
7-85
7-86
7-87
7-88
7-89
7-90
7-91
7-92
7-93
7-94
7-67