Kyocera KM-C2630D Operation Manual page 199

3
Use the keypad to enter a new 4-digit management code.
Inch specifications
Management code change
Able to change management code.(# key)
Default setting - Machine default
Metric specifications
Change MGMT code with #
Able to change management code. (# key)
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Auto sleep ON/OFF
Perform the following procedure to set whether or not to have the
auto sleep function automatically turn the power switch OFF a
Back Close
certain amount of time after copying, or if no operation has been
performed on the copier during that time.
1
Back Close
2
Section 7 COPIER MANAGEMENT
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Metric specifications
Default setting/ Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Select "Auto sleep" under the "Default menu" column on the
left side of the touch panel and then press the "Change #"
key.
The "Auto sleep" screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Management code change 2600
Auto sleep On
Color/B&W Mix Color priority
High Density Print Fast Mode
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Change MGMT code with # 2600
Auto sleep On
Colour/B&W Mix Colour priority
High Density Print Fast Mode
Default setting
End
Management
Counter
check
Print User
Adjustment
report
End
Management
Counter
check
Print User
Adjustment
report
Close
Up
Down
Change #
Close
Up
Down
Change #
7-61