Auto Color Adjustment - Kyocera KM-C2630D Operation Manual

Section 7 COPIER MANAGEMENT

Auto color adjustment

Slight changes in color copying may take place if your color copier
is used over a long period of time. If the color of the originals and
that which appears on the copies begins to differ greatly, use this
procedure to adjust the color.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "User adjustment" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
3
Press the "Auto gray adjust" ["Auto Gray Adjust"] key.
Inch specifications
Default setting / Counter
User adjustment
Drum
Auto gray
refresh
adjust
Default setting
Metric specifications
Default setting / Counter
User adjustment
Auto Grey Drum
refresh
Adjust
Default setting
7-104
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Color B&W Densit Color
Adjustment Regist.
Calibrat
Color B&W Densit Colour
Calibrat Adjustment Regist.
4
Use the keypad to enter the 4-digit management code.
The factory default setting is "2600".
If the entered code matches the registered one, the "Auto
gray adjust" screen will be displayed.
Inch specifications
Enter the administrator number.
Metric specifications
Enter the administrator number.
End
5
Press the "On" key.
A corresponding color pattern will be printed out.
Inch specifications
Auto gray adjust
Output 3 color pattern to adjust the image quality
End
Default setting - User adjustment
Metric specifications
Auto Grey Adjust
Output 3 colour pattern to adjust the image quality
Default setting - User adjustment
Close
NOTE
Make sure there 11" × 8
of the drawers[cassettes].
Close
Close
Close
Close
On
Close
On
" [A4] size paper loaded in one
1/2