Kyocera KM-C2630D Operation Manual page 58

Section 6 OTHER CONVENIENT FUNCTIONS
5
Specify the binding direction of the originals.
Inch specifications
for 2-sided originals
to copy.(Full-color)
Register
on
Original Finished
sided
Open from Open from
2 sided left/right left/right
sided Open from Open from
2 sided top top
ook
2 sided
Metric specifications
for 2-sided originals
to copy.(Full Col.)
Register
Original Finished
sided Left/Right Left/Right
2-sided binding binding
sided
Top Top
2-sided binding binding
ook
2-sided
6
Select the binding direction you want for the finished
copies.
Inch specifications
for 1-sided or 2-sided
originals
y.(Full-color)
Register
Original Finished
Open from Open from
left/right left/right
Open from Open from
top top
Metric specifications
for 1-sided or 2-sided
originals
y.(Full Col.)
Register
Original Finished
Left/Right Left/Right
binding binding
Top Top
binding binding
6-8
for open-faced originals
to copy.(Full-color)
on
Original
sided Open from
2 sided left
sided Open from
2 sided right
ook
2 sided
for open-faced originals
to copy.(Full Col.)
Original
-sided Left
2-sided binding
-sided Right
2-sided binding
Book
2-sided
for open-faced originals
Paper
y.(Full-color)
1
Back Register
Original Finished
Check direct
Check direc
original top
Open from Book
left Duplex
Open from Book
right Book
Rear
for open-faced originals
Paper
y.(Full Col.)
Back Register
Original Finished
Check direct
Check direc
original.
Left Book
binding Duplex
Right Book
binding Book
Back Edg
7
Follow the instructions on the right side of the touch panel
and verify the direction in which the originals were set.
IMPORTANT!
If the designation for the direction that the originals are
set is not correct, copying may be accomplished
Register
incorrectly.
Finished
Inch specifications
Book
Duplex
Book for 1-sided or 2-sided
Book
r)
Register
Finished
Open from
left/right
Register
Open from
top
Finished
Book
Duplex
Metric specifications
Book
Book
for 1-sided or 2-sided
)
Register
Finished
Left/Right
binding
Top
binding
Paper
1
Back
Check direct
8
Set the book
Press the [Start] key.
top side direc
Scanning of the originals will start.
If you set the originals in the optional Document Processor,
copying will start automatically.
If you set an original on the platen, a message will be
displayed telling you to set the next original. In this case,
go to the next step.
Paper
Back
Check direct
Set book or
side directio
9
Replace the first original with the next one and press the
[Start] key.
Scanning of that next original will start.
10
Once you have finished scanning all of the originals, press
the "Scanning finished" key.
Copying will start.
for open-faced originals
originals
Paper Size Set
r)
11x8 /
1
2
Register
Back Close
Check direction Finished
Check direction of
original top side.
Book
Duplex
Book
Book
Left top
Rear
corner
for open-faced originals
originals
Paper Size Set
)
Back Close Register
Finished
Check direction
Check direction of
original.
Book
Duplex
Book
Book
Left top
Back Edge
corner
Paper Size
Set
11x8 /
1
2
Back Close
Check direction
Set the book original
top side direct to rear.
Paper Size
Set
Back Close
Check direction
Set book original top
side direction to back.