Kyocera KM-C2630D Operation Manual page 124

Section 6 OTHER CONVENIENT FUNCTIONS
Specifying the type of originals
This procedure specifies the type of originals being copied between
1-sided, 2-sided and open-faced.
1
With the content of the "Basic" tab displayed, press the
"Original type" key.
The "Original type" screen will be displayed.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Job Build - Step 1
11x8 / 1 sided
1
2
Select Original
paper type
Offset AMS
Reduce
Finished
/Enlarge
Basic Quality
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Job Build - Step 1
1-sided
Select Original
paper type
Group AMS
Reduce/
Finished
Enlarge
Basic Quality
2
Select between "1 sided" ["1-sided"], "2 sided" ["2-sided"]
and "Book", in accordance with the originals being copied.
Inch specifications
Ready to Job build.(Full-color)
Place originals then press Start key.
Original type
1 sided
2 sided
Book
Metric specifications
Ready to Job build.(Full Col.)
Set original. Press Start key.
Original type
1-sided
2-sided
Book
NOTES
• If you selected "1 sided" ["1-sided"], verify the direction
in which the originals were set.
• If you selected "2 sided" ["2-sided"], specify the binding
direction of the originals and then verify the direction
in which the originals were set.
• If you selected "Book", specify the binding direction of
the originals.
• The "2 sided" ["2-sided"] key will be displayed when the
optional Document Processor is installed on your
copier.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
6-74
Insert
1 sided copy
page
1 sided/
2 sided
1 sided copy-Left
Back Edge
Finished page #: 0
Orig. set
direction
Edit
Insert
1-sided Copy
blank page
1-sided/
2-sided
1-sided Copy-Left
Back Edge
Finished page #: 0
Orig. set
direction
Edit
Back
Back
Selecting between 1-sided or 2-sided copies
This procedure selects the type of finished copies to be made
between 1-sided and 2-sided.
1
With the content of the "Basic" tab displayed, press the
"1 sided/2 sided" ["1-sided/2-sided"] key.
The "1 sided/2 sided copy" ["1-sided/2-sided copy"] screen
will be displayed.
Inch specifications
set
Ready to Job build.(Full-color)
End
Place originals then press Start key.
Job Build - Step 1
11x8
Select
paper
Offset
Finished
Basic
Metric specifications
set
Ready to Job build.(Full Col.)
End
Set original. Press Start key.
Job Build - Step 1
Select
paper
Group
Finished
Basic
NOTE
The setting in regard to making either 1-sided or 2-sided
copies can only be made in the first step of the job build
Set
mode and will apply to all steps in the copy job.
Close
Set
Close
1 sided 1 sided copy
/
1
2
Original 1 sided/
type 2 sided
1 sided copy-Left
AMS Back Edge
Finished page #: 0
Reduce Orig. set
/Enlarge direction
Quality Edit
1-sided 1-sided Copy
Original 1-sided/
type 2-sided
1-sided Copy-Left
AMS Back Edge
Finished page #: 0
Reduce/ Orig. set
Enlarge direction
Quality Edit
set
End
Insert
page
set
End
Insert
blank page