Kyocera KM-C2630D Operation Manual page 174

Section 7 COPIER MANAGEMENT
Fax function management ON/OFF
Perform the following procedure when you want to turn copy
management ON or OFF for the fax functions of this machine.
NOTE
This setting is only available when the optional Fax Kit is
installed in your copier.
1
Select "Fax Management" under the "Setting item" column
on the left side of the touch panel and then press the
"Change #" key.
The "Fax Management" screen will be displayed.
Inch specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting Unable to use
Def. Val. of coun. limit 999999
Total size 1 8
Total size 2 11"x17" No specif.
Total size 3 8
Default setting - Management - Management Def. setting
Metric specifications
Management Def. setting
Setting item
Scanner Management On
Fax Management On
Excess of limit Setting You cannot use
Def. Val. of coun. Limit 999999
Total size 1 A3 No specif.
Total size 2 A4 No specif.
Total size 3 B4 No specif.
Default setting - Management - Management Def. setting
7-36
Value
1 / x11" No specif.
2
Change #
1
/ x11" No specif.
2
Value
Change #
2
To turn copy management ON for the fax functions of this
machine, press the "On" key.
Inch specifications
Fax Management
Fax management can be set up.
Default setting - Management -
Metric specifications
Fax Management
Fax management can be set up.
Close
Default setting - Management -
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
Close
screen in step 1.
3
Press the "Close" key.
The touch panel will return to the screen in step 1.
Back
Off
On
Management Def. setting
Back
Off
On
Management Def. setting
Close
Close