Kyocera KM-C2630D Operation Manual page 233

Repeat copying ON/OFF
Perform the following procedure to set whether or not to prohibit
repeat copying, as well as whether or not to make repeat copying
the default setting in the initial mode.
NOTE
This setting is displayed on duplex copiers or when the
optional Memory Copy Board is installed.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Modify Copy" under the "Default menu" column on
the left side of the touch panel and then press the "Change
#" key.
The "Modify Copy" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit
Modify Copy
Display register key
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Preset limit
Modify Copy
Display"Register"key
Customize(Main function)
Customize(Add function)
Default setting
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
999 Set
On / Default Off
On
Change #
Setting mode
999 Set
On / Default Off
On
Change #
3
If you want to prohibit repeat copying, press the "Off" key.
If you want to make repeat copying the default setting in
the initial mode, press the "On" key.
Inch specifications
Modify Copy
Select ON to activate Modify Copy or OFF
to inactivate it.
Default setting - Copy default
Metric specifications
Modify Copy
Select ON to activate Modify Copy or OFF
to inactivate it.
End
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
End
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Up
Down
Close
Up
Down
Section 7 COPIER MANAGEMENT
Function Default
Off Off
On On
Function Default
Off Off
On On
Back Close
Back Close
7-95