Kyocera KM-C2630D Operation Manual page 200

Section 7 COPIER MANAGEMENT
3
Press the "On" key if you want to use the auto sleep
function.
Inch specifications
Auto sleep
Possible to switch to sleep mode automatically if no
oper. is done within fixed time after copy or last oper.
On
Off
Default setting - Machine default
Metric specifications
Auto sleep
Possible to switch to sleep mode automatically if no
oper. is done within fixed time after copy or last oper.
On
Off
Default setting - Machine default
NOTES
• If auto sleep interferes with your copying operations,
turn this function OFF. However, it is recommended
that you try to set a longer time interval until auto
sleep engages before you actually turn it OFF.
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
7-62
Color/B&W Mix [Colour/B&W Mix]
Use the following steps to select the priority mode when copying
documents that mix color and monochrome.
1
Back Close
Back Close
2
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Metric specifications
Default setting/ Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Select mixed color/monochrome from the menu items on the
left, and then press the "Change #" key. This displays the
"Color/B&W Mix" ["Colour/B&W Mix"] screen.
Inch specifications
Default setting / Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Management code change 2600
Auto sleep On
Color/B&W Mix Color priority
High Density Print Fast Mode
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Change MGMT code with # 2600
Auto sleep On
Colour/B&W Mix Colour priority
High Density Print Fast Mode
Default setting
End
Management
Counter
check
User
Print
report Adjustment
End
Management
Counter
check
User
Print
report Adjustment
Close
Up
Down
Change #
Close
Up
Down
Change #