Accessing The Machine Default Settings - Kyocera KM-C2630D Operation Manual

Accessing the machine default settings

Perform the following procedure when you want to access the
screens for each of the various machine default settings.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "Machine default" key on the left side of the touch
panel.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
Language Management
Counter
Bypass
setting check
User
Register Print
Adjustment
orig. size report
Language Management
Counter
Bypass
setting check
User
Register Print
Adjustment
orig. size report
Section 7 COPIER MANAGEMENT
3
Use the keypad to enter the 4-digit management code.
The factory default setting is "2600".
Inch specifications
Enter the administrator number.
Metric specifications
Enter the administrator number.
4
If the entered code matches the registered one, the
"Machine default" screen will be displayed.
Inch specifications
End
Default setting / Counter
Machine default
Auto drawer switching
Paper size (1st drawer)
Paper
Paper
Paper
Default setting
Metric specifications
End
Default setting/ Counter
Machine default
Auto cassette switching
Paper size (1st cassette)
Paper
Paper
Paper
Default setting
NOTES
• It is possible for you to change the 4-digit management
code. (See "Changing the management code" on
page 7-60.)
• Refer to the desired procedure(s) explained under
"Making machine default settings" and perform the
corresponding setting(s).
Default menu Setting mode
On / All types of paper
Auto/Inch
size (2nd drawer)
Auto/Inch
size (3rd drawer) Auto/Inch
Auto/Inch
size (4th drawer)
Default menu Setting mode
On / All types of paper
Auto/Centimeter
size (2nd cassette) Auto/Centimeter
size (3rd cassette) Auto/Centimeter
size (4th cassette)
Auto/Centimeter
Close
Close
Close
Up
Down
Change #
Close
Up
Down
Change #
7-45