Default Operation Mode - Kyocera KM-C2630D Operation Manual

Section 7 COPIER MANAGEMENT
3
Press the key that corresponds to the desired location.
Inch specifications
Select FAX output mode
Set the default fax output destination.
Top tray
TrayA
Tray1
Tray2
Default setting - Machine default
Metric specifications
Select FAX output mode
Set the default fax output destination.
Top tray
TrayA
Tray1
Tray2
Default setting - Machine default
NOTES
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
• When an optional Document Finisher is installed,
Select "Top Tray" and "Finisher." When the Multi Job
Tray is installed, you can select from among "Top Tray,"
"Tray A," and "Tray 1" through "Tray 5."
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
7-56
Back
Tray3
Tray4
Tray5
Back
Tray3
Tray4
Tray5

Default operation mode

Perform the following procedure to set whether the display that
appears after power is turned on to the copier will be the one for
Close
the copy operation mode or for the fax operation mode.
NOTE
This setting is only available when the optional Fax Kit is
installed in your copier.
1
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Close
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Select the main mode" ["Select main mode"] under
the "Default menu" column on the left side of the touch
panel and then press the "Change #" key.
The "Select the main mode" ["Select main mode"] screen
will be displayed.
Inch specifications
Default setting / Counter
Machine default
Select FAX output mode
Select the main mode
Key sound ON/OFF
Date/Time
Time difference
Default setting
Metric specifications
Default setting/ Counter
Machine default
Select FAX output mode
Select main mode
Key sound ON/OFF
Date/Time
Time difference
Default setting
Language
Bypass
setting
Register
orig. size
Language
Bypass
setting
Register
orig. size
Default menu Setting mode
Top tray
Copy mode
On
03/09/03 14:00
GMT+09:00
Default menu Setting mode
Top tray
COPY mode
On
03/09/03 14:00
GMT+09:00
End
Management
Counter
check
User
Print
report Adjustment
End
Management
Counter
check
User
Print
report Adjustment
Close
Up
Down
Change #
Close
Up
Down
Change #