Kyocera KM-C2630D Operation Manual page 99

9
Once the test copy set is complete, a screen will be
displayed in order to verify whether or not you want to
make the initially designated number of copy sets at the
present settings, and the copier will enter a waiting-to-copy
state. Check the test copies.
Inch specifications
Check proof copy.
To stop and retry, press "Cancel" key.
To continue to print, press "Start" key.
Orig. page
1
------- 100%
1 sided APS
Rear
Metric specifications
Check test copy.
To stop and retry, press "Cancel" key.
To continue to print, press "Start" key.
Original
1
------- 100%
1-sided APS
Rear
• If there is no problem with the copies
Press the [Start] key and copying of the initially designated
number of copy sets will start. If you want to change the number
of copies to be made, press the "Change Preset" key and enter the
actual number of copies you do want to make.
• If there is some problem with the copies
Press the "Cancel" key to cancel the copy job and start the
procedure from the beginning.
Count/Set
Output
0/ 2
11x8 / Plain
1
2
1 sided
Cancel
Sort Top tray
Change
Preset
Count/Set
Output
0/ 2
Plain
1-sided
Cancel
Sort Top tray
Change
Preset
Section 6 OTHER CONVENIENT FUNCTIONS
6-49