Kyocera KM-C2630D Operation Manual page 198

Section 7 COPIER MANAGEMENT
3
Press the "+" key or the "-" key to change the displayed time
difference to the desired setting.
Inch specifications
Time difference
GMT + 00:00
Default setting - Machine default
Metric specifications
Time difference
GMT + 00:00
Default setting - Machine default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
7-60
Changing the management code
Perform the following procedure to change the management code
used by the copy manager.
Back Close
1
Back Close
2
IMPORTANT!
If you change the management code from its factory
default, be sure to keep some sort of record of the new
management code. If, for any reason, you forget the
registered management code, you will need to contact
your service representative.
Display the "Machine default" screen.
(See "Accessing the machine default settings" on
page 7-45.)
Inch specifications
Default setting / Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Metric specifications
Default setting/ Counter
Default setting
Copy
Language
default
Bypass
setting
Machine Register
default orig. size
Select "Management code change" ["Change MGMT code
with #"] under the "Default menu" column on the left side of
the touch panel and then press the "Change #" key.
The "Management code change" ["Change MGMT code with
#"] screen will be displayed.
Inch specifications
Default setting / Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Management code change 2600
Auto sleep On
Color/B&W Mix Color priority
High Density Print Fast Mode
Default setting
Metric specifications
Default setting/ Counter
Machine default
Default menu Setting mode
Time difference GMT+09:00
Change MGMT code with # 2600
Auto sleep On
Colour/B&W Mix Colour priority
High Density Print Fast Mode
Default setting
End
Management
Counter
check
User
Print
report Adjustment
End
Management
Counter
check
Print User
Adjustment
report
Close
Up
Down
Change #
Close
Up
Down
Change #