Kyocera KM-C2630D Operation Manual page 234

Section 7 COPIER MANAGEMENT
Registration keys ON/OFF
Perform the following procedure to set whether or not to allow a
"Register" key to be displayed in the screen for those function and
modes which can be registered under the registration keys.
Functions and/or modes can only be registered under registration
keys through the "Register" key.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Display register key" ["Display "Register" key"]
under the "Default menu" column on the left side of the
touch panel and then press the "Change #" key.
The "Display register key" ["Display "Register" key"] screen
will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Preset limit 999 Set
Modify Copy On / Default Off
Display register key On
Customize(Main function)
Customize(Add function)
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Preset limit 999 Set
Modify Copy On / Default Off
Display"Register"key On
Customize(Main function)
Customize(Add function)
Default setting
7-96
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Down
Change #
Setting mode
Up
Down
Change #
3
If you want the "Register" key to be displayed, press the
"On" key. If you do NOT want it to be displayed, press the
"Off" key.
Inch specifications
Display register key
Select One touch key On/Off.
Able to use Register key on each screen.
Default setting - Copy default
Metric specifications
End
Display"Register"key
Select to show Register key On/Off.
Able to use Register key to register/delete at each page.
Default setting - Copy default
End
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Close
On
Off
On
Off
Back Close
Back Close