Kyocera KM-C2630D Operation Manual page 231

Erased border width
Perform the following procedure to determine the default value for
the width of the border to be erased in the two border erase modes.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Default erase width" under the "Default menu"
column on the left side of the touch panel and then press
the "Change #" key.
The "Default erase width" screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left
Default erase width Border
Preset limit 999 Set
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Sort Sort:On
Auto Rotation Rotate
Default margin width Left 6mm 0mm
Default erase width Border 6mm Center 12mm
Preset limit 999 Set
Default setting
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Language Management
Bypass Counter
setting check
User
Register Print
orig. size report Adjustment
Setting mode
Up
Down
1 / " 0"
4
1 1
/ " Center / "
4 2
Change #
Setting mode
Up
Down
Change #
Section 7 COPIER MANAGEMENT
3
Press the "+" key or the "-" key under the "Border" and
"Center" fields to change the displayed widths to those
desired.
Inch specifications
Default erase width
Adjust default setting of erase width.
End
Default setting - Copy default
Metric specifications
Default erase width
Adjust default setting of erase width.
End
Default setting - Copy default
NOTE
If you want to quit the displayed setting without changing
it, press the "Back" key. The touch panel will return to the
screen in step 2.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
Close
The touch panel will return to the contents of the "Basic"
tab.
Close
(0~ / ) (0~1 / )
3 1
4 2
" "
Border Center
(0~18) (0~36)
6 12
mm mm
Border Center
Back Close
Back Close
7-93