Misfeed In The Optional Document Finisher - Kyocera KM-C2630D Operation Manual

6
If there is an original jammed there, remove it while taking
care not to tear it.
NOTES
• If the paper tears, remove all of the remaining pieces
from inside the Document Processor.
• If you have trouble removing the original, rotate the
green dial until the paper is fed to a point where it is
easier to remove.
7
Close the paper reversing unit.
8
Close t left cover. The original set indicator should go out.
Reload the document and start copying again.
NOTE
Be sure to hold the handle in the middle of the cover when
closing it.

Misfeed in the optional Document Finisher

See the Operation Guide for the Document Finisher for information
about what you should do to clear a paper jam caused by a misfeed
in the Document Finisher.
Section 9 TROUBLESHOOTING
9-17