Kyocera KM-C2630D Operation Manual page 279

Message
"Memory full."
"Add paper in drawer x."
["Add paper cassette x."]
"Duplex tray inoperable, call service."
["Duplex unit is out of order. Call service."]
"Remove paper from duplex unit."
"Install duplex unit."
"Clean the main charger"
Operation has been stopped because the copier's memory is full. Press the
"OK" key.
If the error occurred during scanning of originals, press either the
"Continue" key or the "Cancel" key, as appropriate.
"Continue": Copies will be made for those originals that have already been
scanned.
"Cancel": Delete all of the scanned data.
There is no paper in the indicated drawer[cassette]. Load paper of the
indicated size.
The Duplex Unit is out of order and 2-sided copying is not possible. Contact
your service representative or authorized service center immediately.
There is paper remaining inside the Duplex Unit. Remove that paper.
(Only in duplex copiers) The Duplex Unit is not inserted properly. First
pull it out, and then push it all the way back in.
Open the front cover and clean the main charger. This will improve copy
quality.
Section 9 TROUBLESHOOTING
Procedure
Reference
page
---
3-1
---
---
---
10-3
9-3