Section 7 COPIER MANAGEMENT
Color registration [Colour registration]
A color [colour] shear may occur when the copier is first installed,
when it is moved to another place and reinstalled, or when printing
is carried out. In such a case, you can use this color registration
[colour] mode to correct the printing position of each color [colour]
(Cyan, Magenta, Yellow) and cancel the color [colour] shear.
1
With the content of the "Basic" tab displayed, press the
[Default Setting/Counter] key.
The "Default setting" screen will be displayed.
2
Press the "User adjustment" key.
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
3
Press the "Color Regist." ["Colour Regist."] key.
Inch specifications
Default setting / Counter
User adjustment
Drum
Auto gray
adjust
refresh
Default setting
Metric specifications
Default setting / Counter
User adjustment
Auto Grey
Drum
refresh
Adjust
Default setting
7-108
Language
Management
Bypass
Counter
setting
check
User
Register
Print
Adjustment
orig. size
report
Language
Management
Bypass
Counter
setting
check
User
Register
Print
Adjustment
orig. size
report
Color
B&W Densit
Color
Calibrat
Adjustment
Regist.
Color
B&W Densit
Colour
Calibrat
Adjustment
Regist.
4
Use the keypad to enter the 4-digit management code.
The factory default setting is "2600".
If the entered code matches the registered one, the "Color
Registration" ["Colour Registration"] screen will be
displayed.
Inch specifications
Enter the administrator number.
Metric specifications
Enter the administrator number.
End
End
Close
Close
Close
Close