Kyocera KM-C2630D Operation Manual page 218

Section 7 COPIER MANAGEMENT
Cover drawer[cassette]
Perform the following procedure to set which drawer[cassette] will
be used to feed the cover sheets in the cover mode, the
booklet/stitching mode and the book to booklet mode.
1
Display the "Copy default" screen.
(See "Accessing the copy default settings" on
page 7-69.)
Inch specifications
Default setting / Counter
Default setting
Copy
default
Machine
default
Metric specifications
Default setting/ Counter
Default setting
Copy
default
Machine
default
2
Select "Drawer for cover paper" ["Cassette for cover paper"]
under the "Default menu" column on the left side of the
touch panel and then press the "Change #" key.
The "Drawer for cover paper" ["Cassette for cover paper"]
screen will be displayed.
Inch specifications
Default setting / Counter
Copy default
Default menu
Drawer for cover paper 3rd paper
Default magnification Manual
Adjust auto expo.(color) Standard
Adjust auto exposure(B&W) Standard
Adjust auto exposure(OCR) Standard
Default setting
Metric specifications
Default setting/ Counter
Copy default
Default menu
Cassette for cover paper 3rd paper
Default mode Manual
Adjust auto expo.(colour) Standard
Adjust auto exposure(B&W) Standard
Adjust auto exposure(OCR) Standard
Default setting
7-80
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Language Management
Bypass Counter
setting check
User
Register Print
Adjustment
orig. size report
Setting mode
Up
Down
Change #
Setting mode
Up
Down
Change #
3
Press the key that corresponds to the desired
drawer[cassette].
Inch specifications
Drawer for cover paper
Select drawer for cover paper.
Default setting - Copy default
End
Metric specifications
Cassette for cover paper
Select cassette for cover paper.
Default setting - Copy default
End
NOTES
• If you want to quit the displayed setting without
changing it, press the "Back" key. The touch panel will
return to the screen in step 2.
• The setting for drawer[cassette] No.1 will not be
available on duplex copiers because the Duplex Unit is
installed in its place.
• The setting for drawer[cassette] No.2 through No.4 will
only be available when the optional Paper Feeder is
installed on your copier.
4
Press the "Close" key.
The touch panel will return to the screen in step 2.
5
Press the "Close" key once again.
Close
The touch panel will return to the "Default setting" screen.
6
Press the "End" key.
The touch panel will return to the contents of the "Basic"
tab.
Close
Back
1st paper Bypass
2nd paper
3rd paper
4th paper
Back
1st paper Bypass
2nd paper
3rd paper
4th paper
Close
Close