Kyocera KM-C2630D Operation Manual page 247

5
Press the "PRT Chart" key. The chart will be printed out.
Inch specifications
Color Registration
In case to occur color misalignment when printing,
print out chart and input registration value.
Default setting - User adjustment
Metric specifications
Colour Registration
In case misalignment occurs during printing,
print out chart and input registration value.
Default setting - User adjustment
The printing directions of left (L), right (R) and horizontal
(H) positions for each color (Cyan, Magenta, Yellow) are
printed on the color [colour] chart.
After the chart is printed out, the touch panel will return to
the original screen.
<Chart>
-5
-4
-3
-2
-1
0 L
+1
+2
+3
+4
+5
-5
-4
-3
-2
-1
0 L
+1
+2
+3
+4
+5
-5
-4
-3
-2
-1
0 L
+1
+2
+3
+4
+5
6
Check the chart and find the item where two lines overlap
each other most closely.
If this item is located at the position "0", no registration is
required.
In the figure below, "-2" should be registered.
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
C
-5
-4
-3
-2
-1
R 0
+1
+2
+3
+4
+5
H
M
-5
-4
-3
-2
-1
R 0
+1
+2
+3
+4
+5
H
Y
-5
-4
-3
-2
-1
R 0
+1
+2
+3
+4
+5
H
C
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
0 L R 0
+1 +1
+2 +2
+3 +3
+4 +4
+5 +5
H
M
L
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
0 L 0
R
+1 +1
+2 +2
+3 +3
+4 +4
+5 +5
H
Y
-5 -5
-4 -4
-3 -3
-2 -2
-1 -1
0 L R 0
+1 +1
+2 +2
+3 +3
+4 +4
+5 +5
H
7
Press the "Input Reg. value" key. The "Color
Registration(C)" ["Colour Registration(C)"] screen will be
displayed.
Inch specifications
Close
Color Registration
PRT Chart
Input
Reg. value
Default setting - User adjustment
Metric specifications
Close
Colour Registration
PRT Chart
Input
Reg. value
Default setting - User adjustment
8
Use the [+] and [-] keys to enter the value where two lines
overlap each other most closely.
Inch specifications
Color Registration(C)
Default setting - User adjustment
Metric specifications
Colour Registration(C)
Default setting - User adjustment
9
Press the [Next] key. The "Color Registration(M)" ["Colour
Registration(M)"] screen and "Color Registration(Y)"
["Colour Registration(Y)"] screen will be displayed in turn.
Enter the value as described in step 7.
NOTE
To return to the previous screen, press the [Back] key.
Section 7 COPIER MANAGEMENT
In case to occur color misalignment when printing,
print out chart and input registration value.
In case misalignment occurs during printing,
print out chart and input registration value.
Refer to printed Chart, enter the value of the position
that is closest to straight line for L, H, R.
0 0
C-L C-H
Refer to printed Chart, enter the value of the position
that is closest to straight line for L, H, R.
0 0
C-L C-H
Close
PRT Chart
Input
Reg. value
Close
PRT Chart
Input
Reg. value
Cancel
0
C-R
Back
Next
Cancel
0
C-R
Back
Next
7-109